|
Shopping Warehouse
Back to main categories
Sub Categories:
Furniture
Pets
Home Improvement
Kitchen
Home Décor
Garden
Cleaning/Care
Bed/Bath
Dewalt Factory Reconditioned 18 Volt Compact Impact Driver Kit
Features: Compact size & weight allows access into tighter areas and reduces user fatigue. 1,170 in-lbs of maximum torque to perform a wide range of fastening applications. 0-2,400 RPM & 0-3,000 BPM for faster application speed. Textured anti-slip comfort grip provides maximum comfort. Durable magnesium gear case and all metal transmission for extended durability. Heavy-duty impacting mechanism directs torque to fastener without kickback: Specifications: Rating: 18 Volt. Drive: 1/4" Hex Quick Release. No-load RPM: 0-2,400. No-load BPM: 0-3,000. Max Torque: 1,170 in-lbs (97 ft-lbs). Weight: 4.9 lbs. |
Dewalt 18-Volt 1/2-inch Cordless Impact Wrench Kit
Features: 300 ft-lbs of maximum torque to perform a wide range of fastening applications. 0-1,650 RPM & 0-2,600 BPM for faster application speed. Textured anti-slip comfort grip provides maximum comfort. Durable magnesium gear case and all metal transmission for extended durability. Heavy-duty impacting mechanism directs torque to fastener without kickback. |
Dewalt Factory Servoced 12" Double Compound Miter Saw
Features: Patented gearbox and belt drive design result in the greatest vertical capacity of any 12" miter saw - 6" base and 6-5/8" crown. Double bevel allows the user to flip the saw rather than the material, positive bevel stops at crown molding settings, 0 and 45 degrees left and right. 0 - 50 degree miter both left and right to increase capacity. Quick overrides provide bevel capacity up to 48 degrees both left and right to accommodate out of square corners. Tall sliding fence supports up to 6-5/8" crown and easily slides out of the way for bevel cuts. 44-lb. saw is lightweight and portable with built in carrying handle. 15 Amp, 5,000 RPM motor provides power for all cutting applications. Includes: 60 Tooth Series 20 Carbide Blade, Dust Bag and Blade Wrench. Specifications: Amps: 15.0 amps. No Load Speed: 4,000 rpm. Blade Diameter: 12 ". Arbor Size: 5/8 or1 ". Vertical Capacity: Baseboard Against Fence: 6" ". Vertical Capacity: Crown Molding Vertically Nested: 6 5/8" ". Horizontal Capacity: Baseboard Lying Flat: 8" ". Horizontal Capacity: Crown Molding Lying Flat: 6 1/2" ". 45 Degree Bevel Cut Capacity (Max Height): 2"x8" Dimensional Lumber. 45 Degree Bevel Cut Capacity (Max Width): 2"x8" Dimensional Lumber. 90 Degree Cross-Cut Capacity (Max Height): 4"x6" Dimensional Lumber. 90 Degree Cross-Cut Capacity (Max Width): 2"x8" Dimensional Lumber. 45 Degree Miter Cut Capacity (Max Height): 4"x4" Dimensional Lumber. 45 Degree Miter Cut Capacity (Max Width): 2"x6" Dimensional Lumber. Tool Weight: 44.0 lbs. Shipping Weight: 49.0 lbs. |
Dewalt 18-Volt Reciprocating Saw Kit
18 volts of brute cordless power with 0-2800 strokes per minute and a 7/8-inch stroke length, the DW938 reciprocating saw from DeWalt cuts faster than a 4 amp corded saw. At only 6.5 pounds, it's lighter than any corded saw. The electric brake prevents blades from breaking when exiting a plunge cut and the blade reverses for upside down cutting. A pivoting shoe with open top provides maximum visibility. This saw cuts 50 two-by-fours, 144 1-1/2-inch PVC pipes, or 30 6-inch roof vents on one charge. The 18-volt battery interchanges with other tools in the DeWalt 18-volt system. This kit includes 18-volt reciprocating saw, 2 blades (Metal & Wood), one-hour charger, 18-volt battery, and Heavy-Duty carrying case: Features: Powered by the DeWalt 18-volt system of battery packs. Keyless blade clamp allows quick blade change without touching blade or reciprocating shaft. 7/8-inch stroke length and 2,800 spm for fast cutting. Electric brake prevents blades from breaking when exiting plunge cuts. Compact and lightweight at 6.5 lbs. Pivoting shoe with open top for maximum visibility. Blade can be reversed for flush and plunge cutting. Variable speed with trigger lock for increased blade control. Specifications: Voltage: 18 volts. Keyless blade clamp: yes. Strokes per minute: 0 to 2,800 spm. Stroke length: 7/8 inch. Electric brake: yes. Tool weight: 6.5 lbs. Shipping weight: 12 lbs: Includes: 1-hour charger. 1 18-volt XR battery. Reciprocating saw blades(1 Metal, 1 Wood). Heavy-duty kit box. 1 year manufacturer warrany. |
Dewalt Faactory Serviced 14.4Volt Cordless Reciprocating Saw Kit
Tear it up. Packing 14.4 volts of brute cordless power, with 0 to 2,700 strokes per minute and a 7/8-inch stroke length, the DW937 cuts faster than a 4 amp corded saw, and at only 6 pounds, it's lighter than any corded saw, too. The saw comes with an electric brake, which prevents blades from breaking when exiting a plunge cut: Features: Keyless blade change allows quick blade change without touching blade or reciprocating shaft. 7/8" stroke length and 0-2,700 spm for fast cutting. Electric brake reduces coast time. Compact and lightweight; 6.0 lbs. Pivoting shoe with open top for maximum visibility. Blade reverses for upside down cutting. Variable speed with trigger lock for more precise cutting. Includes: -1 hour charger. -14.4V battery. -reciprocating saw blade. -heavy-duty kit box. Specifications: Voltage: 14.4 V. Keyless Blade Clamp: Yes. Strokes/Min: 0-2,700 spm. Stroke Length: 7/8 ". Electric Brake: Yes. Tool Weight: 6 lbs. |
Dewalt Factory Serviced Heavy-Duty 7"/9" Electronic Variable Speed Polisher
Features: Powerful, 8.0 Amp, all ball-bearing motor for long life. Conveniently-located variable speed dial lets user set maximum speed from 1,000 to 3,000 for different materials and applications. Electronic module maintains specified speed even under load. Heat-treated, precision-cut gears for smooth operation. Variable speed trigger allows user to instantly control speed from 0 to dialed setting. External brush caps for easy servicing. Spindle lock for easy pad changing. Specifications: Amps: 8.0 AC Amps. Max Watts Out: 1,400 W. No Load Speed (low): 0-1,000 rpm. No Load Speed (high): 0-3,000 rpm. Spindle Thread: 5/8"-11. Spindle Lock: Yes. Tool Length: 17.3". Tool Weight: 8.25 lbs. Shipping weight: 10.25 lbs. |
Dewalt 18 Volt 4 Piece Combination Kit
Features: Model DW988 1/2" Drill/Driver/Hammerdrill. 450 in. lbs. of maximum torque. Exclusive 3-speed all metal transmission. Model DW939 Circular Saw. Left side blade provides maximum visibility to the cut line. 50ř bevel provides additional capacity for specialty applications. Cuts 2 X 4's at a 45 degree angle in a single pass. Model DW938 Reciprocating Saw. Keyless blade clamp allows for quick blade changes. Variable speed control. Electronic brake. Model DW919 Flexible Floodlight. . Brand New DeWalt DW4KIT-2 18 Volt 4 Piece Combination Kit Specifications. Model DW988 1/2" Drill/Driver/Hammerdrill Voltage: 18V. 1/2" Keyless Chuck. Automatic Spindle Lock. Max. Torque: 500 in-lbs. No Load Speed: 0-450/0-1,450/0-2,000 rpm. Blows/Min: 0-34,000 in MAX 3rd Speed bpm. Capacity In Steel: 1/2". Capacity In Wood: 2". Capacity In Concrete: 1/4". Model DW939 Circular Saw. Voltage: 18V. No Load Speed: 3,700 rpm. Blade Diameter: 6-1/2". Bevel Capacity: 0-50 Degrees. Arbor Size: 5/8". Depth Of Cut At 45 Degrees: 1-5/8". Depth Of Cut At 90 Degrees: 2-1/4 ". Model DW938 Reciprocating Saw. Voltage: 18V. 0-2,800 Strokes per minute. Stroke length: 7/8". Variable speed. Model DW919 Flexible Floodlight. Voltage: 18V. Uses Xenon bulb. Run-Time: 3 hrs. . Standard equipment for the Brand New DeWalt DW4KIT-2 18 Volt 4 Piece Combination Kit. One hour charger. (2) 18V XR+ PACK batteries. 360ř side handle. Double ended screwdriver bit. 16-tooth carbide tipped circular saw blade. Rip fence. Reciprocating saw blade. Carrying case. |
Dewalt 1/2" VSR Hammerdrill
Features: 6.7 amp motor provides high performance and overload protection. 3.85 lbs., lightweight design for extended use and less user fatigue. Dual mode: hammerdrill/drill for wood, steel or masonry applications. 360ř side handle with depth rod offers greater control, versatility, and increased depth accuracy. Two-finger, rubber trigger for increased comfort. Variable speed allows for precise hole placement on work surface. Specifications: Amps: 6.7amps. Max. Watts Out: 550W. No Load Speed: 0-2,700rpm. Blows/Min: 0-46,000bpm. Capacity In Steel: 1/2". Capacity In Wood: 1-1/4". Concrete Optimum: 3/16-3/8". Tool Length: 11-1/2". |
Dewalt Factory Serviced 1/2" VSR Hammerdrill
*Factory Serviced*. Features: 6.7 amp motor provides high performance and overload protection. 3.85 lbs., lightweight design for extended use and less user fatigue. Dual mode: hammerdrill/drill for wood, steel or masonry applications. 360ř side handle with depth rod offers greater control, versatility, and increased depth accuracy. Two-finger, rubber trigger for increased comfort. Variable speed allows for precise hole placement on work surface. Specifications: Amps: 6.7amps. Max. Watts Out: 550W. No Load Speed: 0-2,700rpm. Blows/Min: 0-46,000bpm. Capacity In Steel: 1/2". Capacity In Wood: 1-1/4". Concrete Optimum: 3/16-3/8". Tool Length: 11-1/2". |
Dewalt Factory Serviced Heavy Duty VSR Dual Range 1/2" Hammer-Drill Kit
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to "like new condition". Some tools may contain cosmetic blemishes: The DW515KR 5/8-inch Hammerdrill provides all the power, comfort and durability you'll need for the most demanding applications. The dual mode hammerdrill/drill provides versatility for wood, steel or masonry jobs and can be used at high speed for drilling or low speed for high-torque applications. This unit is equipped with a powerful 8.2 Amp motor for greater overload protection and a built-in clutch to prevent gear damage in lock-up situations. Enjoy the ergonomic features including the rubber grip handles, variable-speed, two-finger, rubber trigger and light tool weight (5.5 lbs.) for increased comfort and control. The tool runs 0-1,050/0-2,400 rpm and 0-18,000/0-41,000 bpm. Includes side handle, chuck key and holder, depth rod, and kit box: Features: 8.2 Amp motor provides high performance and overload protection. High/low gear for high speed drilling, or high torque applications. Dual mode: hammer drill/drill for wood, steel or masonry applications. Rubber grip and two-finger trigger for increased comfort. 360 side handle with depth rod offers greater control, versatility, and increased depth accuracy. Lightweight design for less user fatigue. Variable speed allows for precise hole placement on work surface. Includes: 360 side handle. depth rod. chuck key with holder. heavy-duty kit box. Specifications: Amps: 8.2 Amps. Max Watts Out: 750 W. No Load Speed: 0-1,050 / 0-2,400 rpm. Blows/Min: 0-18,000 / 0-41,000 bpm. Capacity In Steel: 1/2 ". Capacity In Wood: 1-1/2 ". Concrete Optimum: 3/16 - 7/16 ". Concrete Maximum: 1/2 ". Tool Length: 14 ". Tool Weight: 5.5 lbs. |
Dewalt 18 Volt Heavy-Duty Worksite Radio/Charger
Features: 1 hour charger for 7.2V to 18V DEWALT battery packs (except Univolt). Heavy-duty AM/FM radio with auxiliary port allows user to listen to the radio or CD (when plugged into auxiliary port). Runs off of 7.6V to 18V DEWALT batteries making it a cordless radio. Digital Tuner with LCD display, built-in clock, and 8 station memory presets. High efficiency weather resistant speakers with dual bass ports for maximum bass and range. Dual pivoting 11" flexible antenna provides more durability and better reception. Weather sealed charger door opens easily for fast battery changes. The DEWALT 3 - stage charging system provides maximum run-time and extends overall life of the battery. Heavy-Duty storage case allows storage for CD player and CDs. |
Dewalt 14" General Purpose Cut Off Wheel
Features: Double reinforced with two sheets of fiberglass. Premium grain for added wheel life & speed. Enhanced formulations provide longer life. High quality resin bonds. 7/64" edge thickness. Bulk. 1" Arbor. |
Dewalt Factory Serviced 5" Medium Angle Grinder
Features: Factory reconditioned to perform like new! 10.0 AC/8.0 DC amp motor. Operates at 11,000 rpm. The metal gear case dissipates heat for longer bearing gear and motor life. Sliding switch is convenient for extended use applications. |
Dewalt 7"/9" Variable Speed Polisher
Features: Powerful, 7.0 Amp, all ball-bearing motor for long life. Heat-treated, precision-cut gears for smooth operation. Variable speed lets you adjust the speed for different materials and applications. External brush caps for easy servicing. Spindle lock for easy pad changing. Specifications: Amps: 7.0 AC Amps. Max Watts Out: 700 W. No Load Speed: 0-1,750 rpm. Spindle Thread: 5/8"-11". Spindle Lock: Yes. Tool Length: 15.9". Tool Weight : 7.8 lbs. |
Dewalt 14" Multi-Cutter Saw
Features: Multi-Cutter offers versatility by cutting a wide variety of materials including ferrous and non-ferrous metals. Multi-Cutter cuts 4 times faster than chop saws and 8 times faster than portable band saws in 2" x 2" x 1/4" angle iron. Utilizing a carbide tipped blade as opposed to an abrasive wheel, the depth of cut remains constant throughout blade life, eliminating the need for frequent wheel changes associated with abrasive wheel cutting. Specially designed carbide teeth deliver fast, precise, virtually burr-free cuts saving time and money over abrasive wheels by reducing the need for preparation grinding, providing a cleaner work environment free from abrasive dust ingestion and finished cuts that are cool to the touch. 14" 70 tooth carbide tipped blade delivers a lower cost-per-cut compared to abrasive wheels with savings up to 5 cents per cut versus abrasive cutting. Ergonomically designed horizontal handle puts user's wrist in a more comfortable position to help reduce user fatigue and increase productivity. Largest capacity in its class with even more capacity than a deep-cut portable band saw (5-3/16" round & 4-1/2" x 6-1/2" rectangular) allowing user to cut a wider variety of different size materials for more applications. Patented tool-free, 45§ adjustable fence allows for fast and accurate angle cuts without the hassle of using a wrench. 15 Amp / 4.0 HP motor provides more overload capacity to increase performance and durability. Extra wide solid steel base provides increased stability when cutting longer material. The four pre-drilled holes in the base allow easy bolt down to any work bench. The solid steel base also allows users to weld jigs or stops directly to the base. Quick-lock vise allows for fast clamping on different size materials to increase productivity. Heavy-duty lock down pin allows the head of the saw to be locked in the carrying position without the use of a chain. Durable metal top handle allows the saw to be carried easily. Spindle lock allows users to make wheel changes fast and easy saving time and money. On-board wheel change wrench allows for convenient storage and greatly reduces the risk of lost wrenches. Easily accessible brushes allow for convenient servicing on the worksite to minimize downtime. Adjustable chip deflector allows user to channel chips away from hazardous materials and co-workers. Quick-retracting guard allows user to see the line of cut while protecting against chips. Heavy-duty compression spring provides smooth movement and greater durability than torsion springs. Vertical clamp provides the user with the most efficient clamping system in the industry. Standard Equipment tool. 14" carbide tipped blade. wrench. vertical clamp. Specifications: Amps: 15.0 AC/DC Amps. Horsepower: 4.0 HP. No Load Speed: 1,300 rpm. Spindle Lock: Yes. Quick Lock Vise: Yes. Wheel Arbor: 1". Wheel Diameter: 14". Max Capacity (Round): 5-3/16". Max Capacity (Rectangular): 6-1/2" x 4-1/2". Tool Length: 21". Tool Weight: 47.0 lbs. |
Porter Cable 5,500 Watt Electric Generator
Features: 5,500 rated watts, 8,850 surge watts. Briggs & Stratton Vanguard commercial power engine with: overhead valves, cast iron sleeve, low oil protection, dipstick, oversized muffler and spark arrestor. Folding handles for compact storage. 7 gallon tank provides 10.4 hours of run time at half load and 7 hours of run time at full load between fills. Four 120 VAC outlets. Full circuit breaker protection for safety. Porter-Cable advanced alternator design. Focus mounted rubber isolators for minimal vibration. 10" pneumatic tires for easy rolling: Includes: Generator. Engine oil. Portability kit with 10" pneumatic tires. Operating manual. |
Bosch Factory - Reconditioned Framing Nailer & Compressor Combo Kit
*Factory - Reconditioned*. Features: Compressor 2060 - 2.5 Horse Power 6 Gallon Oil-Lube Compressor. Soft-start induction motor & Cast iron sleeves. N80SB-1 - Framing Nailer: Uses a range of fasteners from 2" to 3-1/2", 6d to 16d. Uses 28-degree, wire-weld-collated, clipped-head nails. Lightweight, adjustable depth control and multidirectional exhaust. Holds 75 nails, narrow nose for accurate fastener placement and a combination contact foot for nailing or toe-nailing. Ideal for framing, sheathing, sub-flooring, siding, roof decking, exterior decks, fencing, and bridging: Includes: Compressor. nailer. manual. |
Bosch Factory - Reconditioned 3HP Oil Lube Stack Tank Compressor
*Factory - Reconditioned*. Features: 3 peak HP 15 amp induction motor. Cast iron pump cylinder for extreme durability. Dual air outlets. Synthetic pump oil for low temp operation. 5.1CFM @40 and 4.0CFM @90. |
Skil Factory Serviced Table Saw Leg Set
Features: Stable. Portable. 23 1/2 Height. |
Skil Factory - Reconditioned 14.4V Brute -Tough Drill/Driver
*Factory - Reconditioned*. Features: Tool performs after repeated 1-story drops when all other competitors fail. Unibody Powertrain - Maintains alignment between clutch, gearbox, and motor for the most durable drivetrain system on the market. Steel Reinforced Collar - Enhances durability and protects tool when dropped on the chuck. Two Speed Gearbox Optimized For Two Modes Of Operation - High Torque Mode Produces more than 475 in./lbs. Of Torque, High Speed Mode Generates 1,300 RPM. Dura-shieldTM Housing - Constructed To Withstand Real World Conditions. Ratcheting 1/2" Single Sleeve Chuck with carbide teeth - For One-Handed Operation and stronger bit grip. Externally changeable brushes - Can be replaced in as little as 2 minutes. Bosch Designed Powertrain with the largest Metal Gears - For Increased Life And Durability. Built-in Overload protection - To extend motor life under the toughest applications. Fully adjustable Auxiliary Handle with extra bit storage. |
Skil Factory - Reconditioned 18V Brute Tough Cordless Drill/Driver
*Factory - Reconditioned*. Features: Steel-reinforced collar Enhances durability and protects tool when dropped on the chuck. Unibody powertrain Maintains alignment between clutch, gearbox, and motor for the most durable drivetrain system on the market. Dura-shield housing Constructed to withstand real-world conditions. Two-speed gearbox optimized for two modes of operation High torque mode produces more than 500 in./lbs. of torque, high speed mode generates 1,300 RPM. Externally changeable brushes Can be replaced in as little as 2 minutes. Ratcheting 1/2" single sleeve chuck For one-handed operation. Built-in overload protection To extend motor life under the toughest applications. Finger groove Provides additional grip options for added control. Fully adjustable auxiliary handle with extra bit storage. Ergonomic soft grip handle design. Variable speed soft grip trigger. Includes. 18 Volt Brute Tough Cordless Drill/Driver - 33618. 2 2.4A-h Batteries - BAT026. 1-Hour Charger - BC004. Magnetic Bit Holder - 2610917319. Side Handle - 2602025126. Double-ended Bit. Bit Case - 2610915997. Carrying Case - 2610915779. |
|
